Sectors / Oil and Gas / Guide

CSA Z246.1 in Alberta

A plain guide to Alberta's security rule for oil and gas: who it covers, what the standard asks for, who checks it and where to start.

Every fact here comes from a source listed at the end of the page.

Example finding Rated Low

F-05 A device nobody listed

The radio on this well's controller talks on the network, but it isn't on the asset list.

See all seven kinds of finding

Example finding Rated Medium

F-03 A rule that's too wide

The rule for this valve station's remote terminal allows a whole range of addresses where one would do.

See all seven kinds of finding

Example finding Rated Critical

F-01 A hidden route

Traffic from the control building's antenna reaches the control zone, and no rule allows it.

See all seven kinds of finding

Who It Covers

Since May 31, 2025, every facility on the Alberta Energy Regulator's critical infrastructure list has needed a security program that follows CSA Z246.1.

The list covers pipelines, wells and processing plants, among others. Mines and coal processing plants are on it too.

What the Standard Asks For

CSA Z246.1 is the security management standard for petroleum and natural gas industry systems. Among other things, it covers:

  • Keeping control and business networks in separate zones, with firewalls between them
  • Giving each user and system only the access it needs, and removing access nobody uses
  • Keeping an inventory of every device on the network

It's a full security management standard, so firewalls are only one part of it. They're the part we audit.

Who Checks

The AER can audit your program.

Federally regulated pipelines are held to the same standard by the Canada Energy Regulator. Its rules require companies to audit their security management program at least every three years.

What's Coming

Bill C-8 became law on June 15, 2026. Its Critical Cyber Systems Protection Act lists pipelines and power lines that cross provincial or national borders among Canada's vital systems.

Once the government names the operators the Act covers, they'll need a cybersecurity program and will have to report cybersecurity incidents. As of November 2026, it hasn't named any.

Where to Start

  1. Confirm which of your facilities are on the AER's list.
  2. Write down which zones may talk to which, and why.
  3. Check that your firewall rules allow only that.
  4. Keep a list of every device on the network, and keep it current.
  5. Keep your evidence, so you can show the AER that your program works.

Our audit helps with steps 3 and 4. It checks your firewall rules against your policy and finds devices missing from your list. Every finding comes with its evidence. See what the audit finds

Sources

Every fact on this page comes from one of these, checked on November 2, 2026. This guide is general information, not legal advice.

  • Security Management for Critical Infrastructure Regulation, Alta Reg 84/2024, sections 1, 3 and 6
  • Canadian Energy Regulator Onshore Pipeline Regulations, SOR/99-294, sections 4, 47.1 and 55
  • CSA Z246.1, Security management for petroleum and natural gas industry systems
  • Bill C-8, S.C. 2026, c. 9: Schedules 1 and 2 and sections 7, 9 and 17 of the Critical Cyber Systems Protection Act

Find Out What Your Firewalls Really Allow

Tell us what you're trying to solve. We'll reply within one business day.